XTeer Brake Fluid DOT-4 — detailed description
Brake fluid transmits pedal force through the hydraulic system. XTeer DOT-4 is intended for compatible disc and drum brakes, anti-lock systems and hydraulic clutches. Its PDS describes properties that limit vapour-lock formation and excessive swelling of rubber components under heavy loads.
Dry and wet boiling points are separate laboratory measurements. They do not automatically determine a vehicle’s fluid replacement interval. Follow the vehicle manual and the prescribed service procedure.
Technical data
| Property | Unit | Value |
|---|---|---|
| Kinematic viscosity, −40 °C | mm²/s | 1057 |
| Kinematic viscosity at 100 °C | mm²/s | 2.3 |
| Dry boiling point | °C | 258 |
| Wet boiling point | °C | 163 |
| pH | — | 8.94 |
Check vehicle requirements before substituting or mixing DOT-4 with another type of fluid. The table is taken from the DOT-4 column in the relevant PDS; these are not DOT-3 values.
More products in this category
This list is not a list of automatic substitutes: check each product's requirement and application separately.

